Pool Filter Media

(12 products)

Filter media is what actually traps the dirt in a sand or DE filter. EZ Pools carries Brightline and Dr. Dryden’s Activate glass media, #20 silica filter sand, Zeobrite zeolite, pea gravel for the laterals, and DE powder for DE filters. Find grids, laterals and valves in Pool Filter Parts.

View as

Pool filter media

Choosing Pool Filter Media

Sand and DE filters are only as good as the media inside them. Here is how the options compare:

  • Glass. Recycled glass media traps finer dirt than sand (down to about 5 microns) and you need about 20% less of it by weight: 80 lb of glass replaces 100 lb of sand. Choose Brightline, or Dr. Dryden’s Activate, an activated glass that also resists bacteria and algae growth.
  • Sand. #20 silica pool filter sand, like Mystic White II, is the standard fill for sand filters and the lowest-cost option.
  • Zeolite. Zeobrite is a natural mineral that filters to about 3 microns. A 50 lb bag does the work of about 100 lb of sand.
  • DE powder. Diatomaceous earth is only for DE filters. It coats the filter grids and catches particles down to 3 to 5 microns.
  • Pea gravel. Some sand filters call for a layer of gravel over the laterals before the sand goes in. Check your filter’s manual.

Changing Your Filter Media

Work out how much you need. The filter’s label or manual lists its sand capacity in pounds. For glass, use about 80% of that weight; for zeolite, about half.

Know when it is time. Sand usually needs replacing every 3 to 5 years. Signs it is worn out: cloudy water the filter can’t clear, or pressure that climbs again soon after a backwash.

Protect the laterals. Shut off the pump, drain the tank and cover the center pipe before you pour. Fill the tank about halfway with water first to cushion the laterals, and check them for cracks while the tank is empty. Replacement laterals and multiport valves are in Pool Filter Parts.

Rinse before you filter. New media carries fine dust. Backwash and rinse until the sight glass runs clear before you return the valve to Filter.

Recharge DE after every backwash. Add fresh DE through the skimmer each time you backwash a DE filter, and replace torn grids before they let powder into the pool.

Pool filter media

Frequently Asked Questions about pool filter media

Is glass filter media better than sand?
For most pools, yes. Glass media filters finer particles than sand (down to about 5 microns), resists clumping and channeling, and needs about 20% less media by weight. It costs more up front. Sand still works well and is the cheapest fill for a sand filter.
How much filter media do I need?
Check the label or manual on your filter tank for its sand capacity in pounds. Use the same weight of sand, about 80% of that weight in glass, or about half of it in zeolite.
How often should I change the sand in my pool filter?
Every 3 to 5 years for most residential pools. Replace it sooner if the water stays cloudy after the filter has run for a day, or if the pressure climbs back up soon after you backwash.
Can I put glass or zeolite in my sand filter?
Yes. Glass and zeolite are made to replace sand in standard sand filters with the same valve and laterals. Adjust the weight (about 80% for glass, about half for zeolite), and backwash and rinse well before the first filter cycle.
How much DE powder do I add to a DE filter?
A common guide is 1 lb of DE for every 5 square feet of filter area when you start the filter up, and about 1 lb per 10 square feet after each backwash. Check your filter’s manual for its exact amount, and add the DE slowly through the skimmer with the pump running.
Do I need pea gravel in my sand filter?
Only if your filter’s manual calls for it. Some sand filters use a layer of pea gravel over the laterals to support the sand and keep it from washing out; many smaller filters use sand alone.

Shop Pool Filter Media

Shop our selection of pool filter media: glass media, filter sand, zeolite, pea gravel and DE powder for sand and DE filters. Looking for a new filter? Browse sand filters and DE filters.