LED Pool & Spa Lights

(35 products)

Light up your pool after dark with LED pool and spa lights from Hayward, Pentair, Jandy, PAL and S.R. Smith. Choose color-changing or white LED fixtures, or LED replacement bulbs for older halogen lights, plus the transformers, niches and parts to install them. Not sure what fits? Check the brand and model on your light's face ring, or ask us.

View as

Choosing the Right Pool Light

Most pool lights are bought to replace a light that’s already in the wall, so start with what you have. Four things decide what fits:

  • The niche. The niche is the housing built into the pool wall, and the light screws into it. Lights are made for their own brand’s niche, so match the niche brand first. Pool lights use a large niche and spa lights a small one. A Hayward ColorLogic fits most Hayward and older Pentair niches.
  • Voltage. Pool lights run on 120V or 12V. A 12V light needs a pool light transformer and is the usual choice for steps, benches and spas: code requires a light above 15 volts to sit at least 18 inches below the water line unless it is listed for shallower mounting.
  • Cord length. The cord runs in one piece from the light to the junction box and can never be spliced, so order the same length as your old light, or longer.
  • Color and control. Color lights change together when they match your automation: Pentair IntelliBrite with IntelliCenter or EasyTouch, Hayward ColorLogic with OmniLogic. Mixing brands in one pool usually means they won’t sync.

Want LED without changing the fixture? An LED replacement bulb like the J&J ColorSplash LXG fits many older incandescent lights. Match the voltage and fit a new lens gasket at the same time.

Repair or Replace Your Pool Light

Most pool light problems show up as water behind the lens, a light that flickers or won’t come on, or a GFCI that trips when the light switches on.

Water or fog inside the lens almost always means a failed lens gasket. If the fixture and cord are sound, a new gasket fixes it. Gaskets seal once, so fit a new one every time the lens comes off. Find yours by brand and model in Pool Light Parts.

A GFCI that trips when the light comes on usually means water has reached the wiring. Stop using the light and have it checked.

An LED light that has died or stopped changing color doesn’t always need a whole new fixture. Some, like the Pentair IntelliBrite 5G, take a replacement LED light engine.

A cut or damaged cord means replacing the fixture. Manufacturers don’t allow a light cord to be repaired or spliced.

You rarely need to drain the pool. A wet-niche light keeps spare cord coiled behind it, so after you shut off the breaker the fixture lifts out onto the deck for service.

Pentair IntelliBrite 5G LED Pool Light Lens and Gasket Assembly

Frequently Asked Questions about pool lights

Can I put an LED light in my old pool light niche?
Usually, yes. Replacement LED lights are made to fit their own brand's niche, and the Hayward ColorLogic fits most Hayward and older Pentair niches. If you would rather keep your fixture, an LED replacement bulb fits many older incandescent lights. Check the brand on your light's face ring, then shop Hayward or Pentair pool lights.
Should I choose a 12V or a 120V pool light?
Match the voltage of the light you are replacing. 12V lights run from a pool light transformer and are common in spas and on steps, because code requires a light above 15 volts to sit at least 18 inches below the water line unless it is listed for shallower mounting. 120V lights connect straight to a GFCI-protected circuit.
Why is there water in my pool light?
Water behind the lens almost always means the lens gasket has failed. Replace the gasket, and fit a new one every time the lens is opened. If the light also trips the GFCI, water may have reached the wiring, so stop using it and have it checked. Find gaskets for your model in Pool Light Parts.
Can I change a pool light without draining the pool?
Yes. Turn off the light's breaker, remove the pilot screw at the top of the face ring, and lift the fixture out. Wet-niche lights keep spare cord coiled behind them so the fixture reaches the deck. The pool can stay full.
What cord length do I need for a replacement pool light?
Order the same cord length as your old light, or longer. The cord must run in one piece from the light to the junction box and can never be spliced, so a cord that comes up short means a different light, not an extension.
What size transformer does a 12V pool light need?
Add up the wattage of every light the transformer will run and choose one rated at or above that total, usually 100W or 300W. Use a safety transformer listed for pool and spa lighting, such as the Intermatic PX300S. Browse pool light transformers.

Shop Pool Lights

Bring your pool to life at night with an LED pool or spa light that fits the niche you already have. EZ Pools carries color-changing and white LED lights, LED replacement bulbs, transformers and parts from Hayward, Pentair, Jandy and more, in stock and ready to ship.