Salt Water Chlorinators

(7 products)

A salt water chlorinator makes chlorine from salt dissolved in the pool, so you stop buying and adding chlorine. Each system is a control unit plus a salt cell sized to your pool’s gallons. Replacing only the cell? Shop replacement salt cells.

View as

Choosing a Salt Water Chlorinator

A salt water chlorinator, also called a salt chlorine generator, has two parts: a control unit and a salt cell. Pool water flows through the cell, and a low-voltage current turns the dissolved salt into chlorine. When choosing one, check:

  • Pool size. Systems are rated by gallons, commonly 15,000, 25,000 and 40,000. If your pool is near the limit, or you live somewhere hot, size up.
  • Inground or above ground. Above-ground systems such as the Hayward AquaTrol connect at the return jet or with hose fittings; inground systems are plumbed into the return line.
  • Your automation. If you already have Hayward or Pentair automation, a cell made to plug into it may be all you need.
  • Replacement cells. The cell wears out over time and is replaced on its own, so choose a system whose replacement cells are easy to get.

Running a Salt Water Pool

Keep the salt in range. Each system specifies its salt level. Hayward systems, for example, run at 2,700 to 3,400 ppm. Too little and the cell can’t make enough chlorine.

Watch pH and stabilizer. Salt pools tend to drift up in pH, and the chlorine the cell makes needs stabilizer (CYA) to survive sunlight outdoors.

Clean the cell. When scale builds up on the plates, clean the cell in a mild acid solution using a cell cleaning stand.

Replacing just the cell? Shop replacement salt cells, or find flow switches, unions and boards in Salt Cell Parts & Accessories.

Hayward Salt Cell Cleaning Stand for TurboCells, GLX-CELLSTAND

Frequently Asked Questions about salt water chlorinators

Is a salt water chlorinator the same as a salt chlorine generator?
Yes. Both names mean the same system: a control unit and a salt cell that turn salt dissolved in the pool into chlorine.
What size salt water chlorinator do I need?
Choose a system rated for at least your pool’s gallons. If your pool is close to the rating, or you live somewhere hot or swim a lot, size up to the next model.
Does a salt water pool still need chlorine?
A salt pool is a chlorine pool: the system makes the chlorine for you, so you stop buying and adding it. You still test the water and keep salt, pH and stabilizer in range.
Can I add a salt system to my existing pool?
Usually, yes. The salt cell is plumbed into the return line after the filter and heater, the control unit is wired to power, and salt is added to the water. Above-ground systems can connect at the return jet.
When does the salt cell need replacing?
A salt cell wears out over time. When it can no longer make enough chlorine even when clean and with the salt level right, replace the cell on its own. Shop replacement salt cells.

Shop Salt Water Chlorinators

Shop our selection of salt water chlorinators and stop buying chlorine. EZ Pools carries complete salt chlorine generator systems from Hayward and Jandy, plus replacement cells and parts, in stock and ready to ship.