Stenner Pumps

(8 products)

Stenner peristaltic pumps dose liquid chlorine or muriatic acid into a pool’s return line. EZ Pools carries Stenner Classic Series adjustable and fixed-output pumps, including the 45M5, 45MP5 and 85 Series, plus the pump tubes, check valves and parts to keep them running.

View as

Stenner Pump 45M5, 25 PSI 50 GPD, 45MJL5A1STAA - EZ Pools

Choosing a Stenner Pump

Stenner peristaltic pumps dose liquid chlorine or muriatic acid into the return line. Rollers squeeze a pump tube, so the chemical never touches the motor or gears. When choosing one, check:

  • Output. Adjustable models let you set the feed rate with a dial: the 45M5 doses 2.5 to 50 gallons per day, and the 85 Series up to 85. Fixed models such as the 45MP5 always run at their rated 50 gallons per day.
  • Pressure. The pump’s pressure rating (25 psi on these models) must be higher than the pressure in the line where it injects.
  • Tubing size. Pumps come set up for 1/4-inch or 3/8-inch suction and discharge tubing. Match the tubing and fittings you already have.
  • One pump per chemical. Use separate pumps for chlorine and acid, and never let the two mix.

Keeping a Stenner Pump Running

Replace the pump tube regularly. The squeeze tube is the part that wears. Check it often and replace it before it cracks or leaks. Stenner numbers its tubes (#2, #3, #4, #5) by output range.

Keep the check valve clean. The injection check valve at the return line keeps pool water out of the tubing. Its duckbill wears and scales up over time.

Strain the suction line. A suction line strainer keeps debris in the chemical tank out of the pump tube.

Find tubes, check valves, rollers, gears and tubing in Stenner Pump Parts.

Frequently Asked Questions about Stenner pumps

What is a Stenner pump used for on a pool?
A Stenner pump is a peristaltic pump that doses liquid chlorine or muriatic acid into the pool’s return line, by itself or run by a chemistry controller. It is common on commercial pools and on residential pools that use liquid chlorine.
What is the difference between the Stenner 45M5 and 45MP5?
The 45M5 is adjustable: a dial sets its output from 2.5 to 50 gallons per day. The 45MP5 runs at a fixed 50 gallons per day.
How often should I replace a Stenner pump tube?
The pump tube is the part that wears. Check it often and replace it when it loses its shape, cracks or leaks. Keep a spare so the pump is never down for long. Shop Stenner pump tubes.
Can one Stenner pump feed both chlorine and acid?
No. Use a separate pump and tubing for each chemical. Liquid chlorine and acid must never mix: together they release chlorine gas.

Shop Stenner Pumps

Shop our selection of Stenner pumps and dose liquid chlorine and acid automatically. EZ Pools carries Stenner Classic Series adjustable and fixed-output pumps, plus pump tubes, check valves and parts, in stock and ready to ship.