Pool Season Algae Control 60

Pool Season  |  SKU: 47245960
$2899 ($0.90 / Fl Oz)
Size

Highlights

  • Non-Foaming Formula
  • Prevents and Eliminates Algae
  • Compatible with Saltwater and Chlorine Pools
  • Long-Lasting Weekly Protection
  • Safe for All Pool Surfaces

Description

Pool Season Algae Control 60: a highly effective, non-foaming 60% polyquat algaecide for swimming pools and attached spas. Prevents and eliminates green, black, and mustard algae, suitable for regular use.

This is a non-foaming, non-metallic, 60% strength polyquat algaecide.

Dosage

Initial Treatment for Freshly Cleaned and Filled Pools

Add 6 to 11 fluid ounces of this product per 10,000 gallons of water.

Routine Maintenance

Add 2 to 4 fluid ounces per 10,000 gallons of water every 5 to 7 days.

Visible Algae Treatment

For pools with visible algae growth, add 11 to 17 fluid ounces per 10,000 gallons of water.

Directions

Routine Application

With the pool in normal operation, add the recommended dose of Algaecide 60 (typically 2-4 fluid ounces per 10,000 gallons) around the pool perimeter, weekly. Ensure proper circulation and maintain balanced water chemistry.

Algae Treatment

  1. Brush pool surfaces thoroughly to loosen algae.
  2. Apply Algaecide 60 at a treatment dose (e.g., 6-11 fluid ounces per 10,000 gallons) directly onto affected areas. Ensure a pH level of 7.4 - 7.6 & a Free Chlorine reading of around 5 ppm.
  3. For stubborn black algae on white plaster pools, you can sprinkle granular shock (Cal-Hypo) on top of the algae. Allow the shock to sit on the black algae for a few minutes, then brush away. Algaecide alone will not remove black algae.
Show More

Severe Algae Treatment (Green to Clean)

  1. Heavily shock the pool with an oxidizer like Super Shockwave to rapidly elevate free chlorine levels.
  2. Apply a higher dose of Algaecide 60 (e.g., 11-17 fluid ounces per 10,000 gallons) uniformly across the pool.
  3. Vigorously brush all pool surfaces to remove extensive algae deposits.
Show More

Frequently Asked Questions

How do I apply Pool Season Algae Control 60 for algae prevention?
For routine maintenance, add 2-4 fluid ounces per 10,000 gallons of water every 5-7 days. Pour the product around the edges of the pool with the pump running to ensure even distribution.
How do I use Pool Season Algae Control 60 for treating existing algae?
For visible algae, first brush affected areas and shock the pool. Then, add 6-11 fluid ounces per 10,000 gallons directly into the water. Run the pump continuously for at least 24 hours and brush daily until algae is gone.
Should I add algaecide before or after shocking?
It is best to add algaecide after shocking the pool. Wait for chlorine levels to return to normal (below 5 ppm) before adding algaecide, as high chlorine levels can reduce its effectiveness.
Can I swim after adding Pool Season Algae Control 60?
Yes, swimmers can re-enter the pool approximately 15 minutes after application so long as the rest of the chemicals check out.
Is Pool Season Algae Control 60 compatible with saltwater pools?
Yes, it is compatible with both chlorine and saltwater pools, helping to prevent and eliminate algae without affecting water chemistry.

Additional Information

Ingredients & Resources

Poly[oxyethylene (dimethyliminio) ethylene (dimethyliminio) ethylene dichloride] : 60%

MSDS MSDS

Shipping Details

Shipping Dimensions
4 x 4 x 10 inch
Product Weight
2 lb

This product ships free via UPS Ground.

Highlights

  • Non-Foaming Formula
  • Prevents and Eliminates Algae
  • Compatible with Saltwater and Chlorine Pools
  • Long-Lasting Weekly Protection
  • Safe for All Pool Surfaces

Frequently Asked Questions

How do I apply Pool Season Algae Control 60 for algae prevention?
For routine maintenance, add 2-4 fluid ounces per 10,000 gallons of water every 5-7 days. Pour the product around the edges of the pool with the pump running to ensure even distribution.
How do I use Pool Season Algae Control 60 for treating existing algae?
For visible algae, first brush affected areas and shock the pool. Then, add 6-11 fluid ounces per 10,000 gallons directly into the water. Run the pump continuously for at least 24 hours and brush daily until algae is gone.
Should I add algaecide before or after shocking?
It is best to add algaecide after shocking the pool. Wait for chlorine levels to return to normal (below 5 ppm) before adding algaecide, as high chlorine levels can reduce its effectiveness.
Can I swim after adding Pool Season Algae Control 60?
Yes, swimmers can re-enter the pool approximately 15 minutes after application so long as the rest of the chemicals check out.
Is Pool Season Algae Control 60 compatible with saltwater pools?
Yes, it is compatible with both chlorine and saltwater pools, helping to prevent and eliminate algae without affecting water chemistry.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Back to top